Aluminum Products

Approx. Rs 550 / KgGet Latest Price

Product Price :Get Latest Price

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 2014 is a high-strength aluminum alloy with excellent machinability. Here's some information specifically about aluminum alloy 2014 round rods:

1. Composition: Aluminum alloy 2014 primarily consists of aluminum, with key alloying elements including copper (around 3.9-5.0%), magnesium (around 0.2-0.8%), and manganese (around 0.4-1.2%). It may also contain small amounts of other elements such as silicon and iron.

2. Properties:

   • Density: Approximately 2.78 g/cm³
   • Melting Point: Around 535°C (995°F)
   • Tensile Strength: Typically ranging from 400 to 440 MPa (58 to 64 ksi)
   • Yield Strength: Typically 300 MPa (43.5 ksi)
   • Elongation: Typically 12–18% in 50 mm (2 in)
   • Modulus of Elasticity: Approximately 72 GPa (10,400 ksi)
   • Electrical Conductivity: Moderate electrical conductivity

3. Applications:

   • Aerospace: Aluminum alloy 2014 is commonly used in aerospace applications, particularly in the manufacturing of aircraft structural components and fittings due to its high strength-to-weight ratio and excellent machinability.
   • Automotive Industry: It is used in the automotive industry for the production of high-strength components such as wheels, pistons, and various engine parts.
   • Machinery and Equipment: Aluminum alloy 2014 round rods are utilized in the manufacturing of machinery and equipment where high strength and good machinability are required, such as in the production of shafts, gears, and fasteners.
   • Sporting Goods: Due to its strength and machinability, it is used in the production of sporting goods equipment such as bicycle frames, baseball bats, and other high-performance gear.
   • Marine Applications: While not as corrosion-resistant as some other aluminum alloys, alloy 2014 may still find use in marine applications for components that require high strength and good machinability.

4. Round Rods: Round rods made from aluminum alloy 2014 are available in various diameters and lengths. They are commonly used in applications where high strength, good machinability, and moderate corrosion resistance are required.

5. Surface Finish: Aluminum alloy 2014 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated, depending on the specific requirements of the application.

Aluminum alloy 2014 round rods offer excellent mechanical properties, making them suitable for a wide range of demanding applications across industries where strength, machinability, and moderate corrosion resistance are required.

Aluminum alloy 2014 round rods find applications in various industries where high strength, good machinability, and moderate corrosion resistance are required. Here are some common applications:

1. Aerospace: Aluminum alloy 2014 round rods are widely used in aerospace applications for manufacturing structural components and fittings in aircraft. These include wing and fuselage structures, landing gear components, and fasteners. The high strength-to-weight ratio and excellent machinability of alloy 2014 make it suitable for aerospace applications where both performance and precision are critical.

2. Automotive Industry: In the automotive sector, aluminum alloy 2014 round rods are employed in the production of high-strength components. These include engine parts such as pistons, connecting rods, and cylinder heads, as well as chassis components such as suspension parts and steering components. The alloy's strength and machinability contribute to improved performance and fuel efficiency in vehicles.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 5083 round rods offer several beneficial characteristics that make them suitable for various applications. Here's some information about aluminum alloy 5083 round rods:

1. Composition: Aluminum alloy 5083 primarily consists of aluminum (Al) with additions of magnesium (Mg) and manganese (Mn). The typical composition includes approximately 95.2% aluminum, 4.5% magnesium, and 0.15% manganese, with trace amounts of other elements.

2. Corrosion Resistance: 5083 aluminum alloy exhibits excellent resistance to corrosion, particularly in marine environments. This makes it highly suitable for applications where exposure to saltwater or other corrosive elements is expected.

3. High Strength: 5083 round rods offer good strength characteristics, both at room temperature and in elevated temperature conditions. This strength is beneficial for applications requiring structural integrity and load-bearing capacity.

4. Weldability: Aluminum alloy 5083 round rods have good weldability, allowing for the fabrication of welded assemblies and structures using common welding techniques such as TIG (tungsten inert gas) welding, MIG (metal inert gas) welding, or resistance welding.

5. Formability: 5083 round rods are readily formable, enabling them to be easily bent, shaped, and fabricated into various configurations without compromising their mechanical properties. This formability makes them suitable for applications requiring complex shapes or designs.

6. Machinability: While not as easily machined as some other aluminum alloys, 5083 round rods can be machined using standard methods with appropriate tooling and cutting parameters. This allows for additional machining processes if necessary to achieve specific dimensions or surface finishes.

7. Lightweight: Like all aluminum alloys, 5083 round rods are lightweight, offering advantages in applications where weight reduction is desirable, such as aerospace, automotive, and marine industries.

8. Applications: Aluminum alloy 5083 round rods find applications in various industries and sectors, including marine, aerospace, automotive, construction, and general engineering. Common applications include marine components, aircraft structural parts, automotive parts, pressure vessels, and architectural elements.

9. Availability: 5083 round rods are readily available from metal suppliers and distributors in various diameters and lengths to meet the needs of different applications. They may be supplied in annealed or tempered conditions, depending on the specific requirements of the application.

Overall, aluminum alloy 5083 round rods offer a combination of corrosion resistance, strength, weldability, and formability, making them suitable for a wide range of applications across industries.

Aluminum alloy 5083 round rods find application in various industries and sectors where their specific properties are advantageous. Here are some common applications:

1. Marine Industry: One of the primary applications of aluminum alloy 5083 round rods is in the marine industry. They are used for manufacturing components such as boat railings, boat hardware, hulls, decks, and superstructures due to their excellent corrosion resistance, particularly in marine environments.

2. Aerospace: In the aerospace industry, 5083 round rods are utilized for producing structural components such as fuselage frames, wing ribs, and aircraft instrumentation. Their lightweight nature and high strength-to-weight ratio make the.................

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Aluminum alloy 6063 round rods are solid cylindrical bars made from aluminum alloy 6063, which is a widely used alloy known for its excellent extrudability, corrosion resistance, and versatility. Here's some information about aluminum alloy 6063 and its potential use in round rod form:

1. Composition: Aluminum alloy 6063 is primarily composed of aluminum (Al) with additional alloying elements such as magnesium (Mg) and silicon (Si). The typical composition includes approximately 97.9% aluminum, 1.0% magnesium, 0.7% silicon, and trace amounts of other elements.

2. Properties:

   • Excellent Extrudability: 6063 round rods are known for their excellent extrudability, making them easy to shape and form into complex profiles and shapes using extrusion processes. This property allows for the creation of custom designs and profiles to meet specific requirements.
   • Corrosion Resistance: These round rods exhibit good corrosion resistance, particularly in environments where exposure to moisture and atmospheric elements is common. This property ensures durability and longevity in various applications, even in outdoor or corrosive environments.
   • Weldability: Aluminum alloy 6063 round rods have good weldability, allowing for ease of fabrication and assembly using common welding techniques. This feature enhances their versatility and ease of use in manufacturing processes.
   • Machinability: 6063 round rods are easily machinable, allowing for the fabrication of intricate shapes and components with precision. This property facilitates the production of custom parts and components to meet specific design requirements, increasing manufacturing flexibility.
   • Formability: These round rods can be formed and shaped using standard forming processes such as bending, extrusion, and rolling, enabling the creation of custom components to meet specific design needs. This feature allows for greater design freedom and flexibility in product development.
   • Anodizing Potential: Aluminum alloy 6063 round rods have good anodizing potential, allowing for the application of decorative or protective surface finishes. This property enhances their aesthetic appeal and provides additional protection against corrosion and wear.
   • Heat Treatability: While not as heat-treatable as some other aluminum alloys, 6063 round rods can undergo some heat treatment processes to improve their mechanical properties, such as strength and hardness.

3. Applications:

   • Architectural Applications: Aluminum alloy 6063 round rods are widely used in architectural applications for building construction, window and door frames, curtain walls, and architectural trims. Their excellent extrudability, corrosion resistance, and aesthetic appeal make them popular choices for architectural designs.
   • Automotive: These round rods may find applications in the automotive industry for manufacturing structural components, trim parts, and decorative elements. Their lightweight nature, corrosion resistance, and formability make them suitable for various automotive applications.
   • Furniture: Aluminum alloy 6063 round rods are used in the manufacturing of furniture, including frames, supports, and decorative elements. Their lightweight, corrosion resistance, and aesthetic appeal make them ideal for modern furniture designs.
   • Electronics: These round rods may be utilized in the electronics industry for manufacturing heat sinks, chassis, and enclosures. Their excellent thermal conductivity and lightweight properties make them suitable for use in electronic devices and equipment where heat dissipation and weight reduction are important considerations.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price

Aluminum alloys are mixtures of aluminum with other elements like magnesium, silicon, copper, or zinc to improve strength, durability, and corrosion resistance. These alloys are widely used in industries requiring lightweight yet strong materials.

• Applications: Automotive, aerospace, construction, and packaging industries.
• Types: 2024 (for aircraft structures), 6061 (general-purpose structural), 7075 (for aerospace).
• Properties: Lightweight, corrosion-resistant, formable.

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 1100 is a commercially pure aluminum grade, often referred to as "commercially pure" aluminum. It is known for its excellent corrosion resistance, high electrical conductivity, and good thermal conductivity. Here's some basic information about aluminum alloy 1100 round rods:

1. Composition: Aluminum alloy 1100 consists of aluminum (minimum 99% purity) and trace amounts of other elements, primarily copper (0.05–0.20%), iron (0.95% max), silicon (0.95% max), manganese (0.05% max), zinc (0.10% max), and other minor impurities.

2. Properties:

   • Density: Approximately 2.71 g/cm³
   • Melting Point: Around 660.3°C (1220.5°F)
   • Tensile Strength: Ranges from 75 to 110 MPa (10.9 to 16 ksi)
   • Yield Strength: Typically 34–42 MPa (4.9–6.1 ksi)
   • Elongation: Typically 12–35% in 50 mm (2 in)
   • Modulus of Elasticity: Around 69 GPa (10,000 ksi)
   • Electrical Conductivity: Excellent electrical conductivity, around 62% of copper's conductivity.

3. Applications:

   • General Fabrication: Due to its ease of forming, welding, and machining, aluminum alloy 1100 is commonly used in various fabrication processes.
   • Chemical Equipment: It is often used in chemical processing equipment due to its corrosion resistance.
   • Reflectors: Aluminum alloy 1100 is used in reflectors due to its excellent reflectivity.
   • Heat Exchangers: Its good thermal conductivity makes it suitable for heat exchangers.
   • Food and Beverage Containers: Its corrosion resistance and non-toxicity make it suitable for food and beverage containers.

4. Round Rods: Round rods made from aluminum alloy 1100 are commonly used in applications where corrosion resistance, electrical conductivity, and formability are required. These rods can be machined, welded, and formed into various shapes as per the requirements of the application.

5. Surface Finish: Aluminum alloy 1100 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated for specific applications.

6. Availability: Aluminum alloy 1100 round rods are readily available from aluminum suppliers and distributors in various diameters and lengths to suit different applications.

When selecting aluminum alloy 1100 round rods for a specific application, factors such as mechanical properties, corrosion resistance, and surface finish should be considered to ensure optimal performance.

Aluminum alloy 1100 round rods find applications in various industries and sectors due to their specific properties. Here are some common applications:

1. Electrical Transmission and Distribution: Aluminum alloy 1100 round rods are used in electrical transmission lines and bus bars due to their excellent electrical conductivity. They help in efficient power transmission and distribution.

2. Reflective Surfaces: The high reflectivity of aluminum alloy 1100 makes it suitable for reflective surfaces, such as lighting fixtures, solar reflectors, and decorative mirrors.

3. Chemical Equipment: Its corrosion resistance makes it suitable for use in chemical processing equipment, including storage tanks, piping, and fittings.

4. Heat Exchangers: Aluminum alloy 1100 round rods are used in the manufacturing of heat exchangers due to their good thermal conductivity. They help in efficient heat transfer in HVAC systems, refrigeration units, and automotive radiators.

5. Food and Beverage Industry: Aluminum alloy 1100 is often used in the food and beverage industry for the fabrication of containers, utensils, and packaging materials due to its non-toxicity, corrosion resistance, and ease of fabrication.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 1050 is another commercially pure aluminum grade, similar to alloy 1100 but with slightly different chemical composition and properties. Here's some information specifically about aluminum alloy 1050 round rods:

1. Composition: Aluminum alloy 1050 consists primarily of aluminum, with a minimum purity of 99.5%. It also contains trace amounts of other elements, including iron (0.4%), silicon (0.25%), copper (0.05%), manganese (0.05%), and zinc (0.05%).

2. Properties:

   • Density: Approximately 2.71 g/cm³
   • Melting Point: Around 660.3°C (1220.5°F)
   • Tensile Strength: Typically ranging from 55 to 95 MPa (8 to 14 ksi)
   • Yield Strength: Typically 35 MPa (5 ksi)
   • Elongation: Typically 28–34% in 50 mm (2 in)
   • Modulus of Elasticity: Approximately 69 GPa (10,000 ksi)
   • Electrical Conductivity: High electrical conductivity, similar to alloy 1100, making it suitable for electrical applications.

3. Applications:

   • Electrical Components: Aluminum alloy 1050 round rods are commonly used in electrical components such as bus bars, conductors, and transformers due to their high electrical conductivity.
   • Chemical Industry: Its corrosion resistance makes it suitable for use in chemical processing equipment, storage tanks, and piping.
   • Reflective Surfaces: Aluminum alloy 1050 is utilized in reflective surfaces, similar to alloy 1100, for applications such as lighting fixtures and solar reflectors.
   • General Fabrication: It is also used in various fabrication applications, including sheet metal work, architectural components, and decorative trim.

4. Round Rods: Round rods made from aluminum alloy 1050 exhibit similar properties and applications to those made from alloy 1100. They are available in various diameters and lengths and are commonly used in applications where corrosion resistance, electrical conductivity, and formability are required.

5. Surface Finish: Aluminum alloy 1050 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated, depending on the specific requirements of the application.

Aluminum alloy 1050 round rods offer similar benefits and applications as alloy 1100 but may have slight differences in mechanical properties and composition. They are widely used in various industries where their specific combination of properties meets application requirements.

Aluminum alloy 1050 round rods find applications across various industries and sectors due to their specific properties. Here are some common applications:

1. Electrical Components: Aluminum alloy 1050 round rods are extensively used in electrical applications due to their high electrical conductivity. They are employed in the manufacturing of bus bars, conductors, transformers, and other electrical components where efficient electrical conductivity is crucial.

2. Chemical Industry: The corrosion resistance of aluminum alloy 1050 makes it suitable for use in the chemical industry. It is utilized in the fabrication of chemical processing equipment, including storage tanks, piping, and fittings, where resistance to corrosion from chemical substances is essential.

3. Reflective Surfaces: Aluminum alloy 1050 is utilized in applications requiring reflective surfaces. It is commonly used in the manufacture of lighting fixtures, solar reflectors, and reflective coatings due to its high reflectivity and corrosion resistance.

4. General Fabrication: Aluminum alloy 1050 round rods are versatile and find use in various general fabrication applications. They are employed in sheet metal work, architectural components, decorative trim, and other fabrication projects where a combination ..............

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 2017 is a precipitation-hardened alloy known for its high strength and excellent machinability. Here's some information specifically about aluminum alloy 2017 round rods:

1. Composition: Aluminum alloy 2017 primarily consists of aluminum, with key alloying elements including copper (around 3.5-4.5%), and manganese (around 0.4-1.0%). It may also contain small amounts of other elements such as silicon and iron.

2. Properties:

   • Density: Approximately 2.78 g/cm³
   • Melting Point: Around 485°C (905°F)
   • Tensile Strength: Typically ranging from 350 to 480 MPa (51 to 70 ksi)
   • Yield Strength: Typically 290 MPa (42 ksi)
   • Elongation: Typically 10–20% in 50 mm (2 in)
   • Modulus of Elasticity: Approximately 71 GPa (10,300 ksi)
   • Electrical Conductivity: Moderate electrical conductivity

3. Applications:

   • Machined Components: Aluminum alloy 2017 round rods are widely used in applications requiring high-strength machined components. Its excellent machinability allows for the production of intricate parts with tight tolerances, such as fittings, connectors, and hydraulic valve bodies.
   • Fasteners: The alloy's high strength makes it suitable for manufacturing various types of fasteners, including bolts, screws, and rivets, used in aerospace, automotive, and industrial applications.
   • Bearings and Bushings: Aluminum alloy 2017 is utilized in the production of bearings and bushings due to its wear resistance and machinability. These components find applications in machinery, equipment, and automotive systems.
   • Structural Components: In certain industries, such as aerospace and transportation, alloy 2017 round rods may be used for manufacturing structural components requiring high strength and good machinability. These include aircraft fittings, automotive chassis components, and bicycle frames.
   • Pneumatic Systems: The alloy's combination of strength and machinability makes it suitable for use in pneumatic systems, including pneumatic cylinders, actuators, and valves.

4. Round Rods: Round rods made from aluminum alloy 2017 are available in various diameters and lengths. They are commonly used in applications where high strength, excellent machinability, and moderate corrosion resistance are required.

5. Surface Finish: Aluminum alloy 2017 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated finishes, depending on the specific requirements of the application.

Aluminum alloy 2017 round rods offer excellent mechanical properties and machinability, making them suitable for a wide range of applications across industries where strength and precision machining are essential

Aluminum alloy 2017 round rods find applications in various industries where high strength, excellent machinability, and moderate corrosion resistance are required. Here are some common applications:

1. Machined Components: Aluminum alloy 2017 round rods are extensively used in applications requiring high-strength machined components. Their excellent machinability allows for the production of intricate parts with tight tolerances, such as fittings, connectors, hydraulic valve bodies, and other precision components used in machinery and equipment.

2. Fasteners: The high strength and machinability of alloy 2017 make it suitable for manufacturing various types of fasteners, including bolts, screws, and rivets. These fasteners are used in aerospace, automotive, construction, and industrial applications where reliable and durable connections are essential.

Additional Information:

Approx. Rs 2,000 / KgGet Latest Price

Aluminum alloy 2090 is a high-strength aluminum-lithium alloy known for its excellent strength-to-weight ratio and good fatigue resistance. Here's some information specifically about aluminum alloy 2090 round rods:

1. Composition: Aluminum alloy 2090 primarily consists of aluminum, with lithium as the main alloying element (around 2.7-3.3%). It may also contain small amounts of other elements such as copper, magnesium, and zirconium.

2. Properties:

   • Density: Approximately 2.65 g/cm³
   • Melting Point: Around 560°C (1040°F)
   • Tensile Strength: Typically ranging from 380 to 480 MPa (55 to 70 ksi)
   • Yield Strength: Typically 315 MPa (46 ksi)
   • Elongation: Typically 10–20% in 50 mm (2 in)
   • Modulus of Elasticity: Approximately 71 GPa (10,300 ksi)
   • Electrical Conductivity: Moderate electrical conductivity

3. Applications:

   • Aerospace: Aluminum alloy 2090 round rods are commonly used in aerospace applications, particularly in the manufacturing of structural components for aircraft and spacecraft. These components include fuselage frames, wing spars, and structural reinforcements. The alloy's high strength-to-weight ratio and good fatigue resistance make it ideal for aerospace applications where lightweight yet durable materials are crucial.
   • Defense Industry: Alloy 2090 may find use in the defense industry for manufacturing military aircraft components, missiles, and other aerospace-related structures. Its high strength and lightweight properties contribute to the performance and efficiency of defense systems.
   • Automotive Industry: While less common, aluminum alloy 2090 round rods may also be utilized in the automotive industry for lightweight structural components in high-performance vehicles. The alloy's strength-to-weight ratio and fatigue resistance can contribute to improved fuel efficiency and performance.
   • Structural Engineering: In structural engineering applications, aluminum alloy 2090 round rods may be used for constructing lightweight yet sturdy structures such as bridges, towers, and architectural elements. The alloy's high strength and lightweight properties make it suitable for applications where weight reduction is a priority.
   • Industrial Applications: Alloy 2090 round rods may be employed in various industrial applications requiring high-strength materials, such as machinery components, pressure vessels, and automotive parts.

4. Round Rods: Round rods made from aluminum alloy 2090 are available in various diameters and lengths. They are commonly used in applications where high strength, lightweight properties, and good fatigue resistance are required.

5. Surface Finish: Aluminum alloy 2090 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated finishes, depending on the specific requirements of the application.

Aluminum alloy 2090 round rods offer excellent mechanical properties and lightweight properties, making them suitable for a wide range of demanding applications across industries where strength, durability, and weight reduction are essential.

Additional Information:

Approx. Rs 2,000 / KgGet Latest Price

Aluminum alloy 2070 is a high-strength aluminum alloy with excellent corrosion resistance. Here's some information specifically about aluminum alloy 2070 round rods:

1. Composition: Aluminum alloy 2070 is primarily composed of aluminum, with a small amount of copper and magnesium added for strength and corrosion resistance. It may also contain trace amounts of other elements to further enhance its properties.

2. Properties:

   • Density: Approximately 2.77 g/cm³
   • Melting Point: Around 582°C (1080°F)
   • Tensile Strength: Typically ranging from 450 to 510 MPa (65 to 74 ksi)
   • Yield Strength: Typically 400 MPa (58 ksi)
   • Elongation: Typically 8–12% in 50 mm (2 in)
   • Modulus of Elasticity: Approximately 70 GPa (10,000 ksi)
   • Electrical Conductivity: Moderate to high electrical conductivity

3. Applications:

   • Automotive Industry: Aluminum alloy 2070 round rods are commonly used in the automotive industry for manufacturing components such as engine parts, chassis components, and structural reinforcements. The alloy's high strength-to-weight ratio and corrosion resistance make it ideal for applications requiring lightweight yet durable materials.
   • Marine Applications: Alloy 2070 is suitable for marine applications where corrosion resistance is essential. It is used for manufacturing marine hardware, boat fittings, and structural components exposed to saltwater and harsh marine environments.
   • Construction Industry: In the construction industry, aluminum alloy 2070 round rods may be used for architectural applications such as curtain walls, window frames, and roofing systems. The alloy's corrosion resistance and aesthetic appeal make it suitable for exterior building components.
   • Electrical Industry: Due to its moderate to high electrical conductivity, alloy 2070 round rods may find applications in the electrical industry for manufacturing conductive components such as bus bars, electrical connectors, and power transmission lines.
   • General Engineering: Aluminum alloy 2070 round rods can be utilized in various general engineering applications where high strength, corrosion resistance, and lightweight properties are required. These include machinery components, pressure vessels, and structural elements in industrial settings.

4. Round Rods: Round rods made from aluminum alloy 2070 are available in various diameters and lengths. They are commonly used in applications where high strength, corrosion resistance, and lightweight properties are essential.

5. Surface Finish: Aluminum alloy 2070 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated finishes, depending on the specific requirements of the application.

Aluminum alloy 2070 round rods offer excellent mechanical properties, corrosion resistance, and lightweight properties, making them suitable for a wide range of applications across industries where strength, durability, and weight reduction are essential.

Additional Information:

Approx. Rs 2,000 / KgGet Latest Price

Aluminum alloy 2099 is a high-strength aluminum-copper alloy known for its excellent mechanical properties and corrosion resistance. Here's some information specifically about aluminum alloy 2099 round rods:

1. Composition: Aluminum alloy 2099 primarily consists of aluminum, with copper as the main alloying element (around 4.4-5.0%). It may also contain small amounts of other elements such as magnesium, manganese, and chromium to further enhance its properties.

2. Properties:

   • Density: Approximately 2.81 g/cm³
   • Melting Point: Around 580°C (1076°F)
   • Tensile Strength: Typically ranging from 480 to 550 MPa (70 to 80 ksi)
   • Yield Strength: Typically 410 MPa (60 ksi)
   • Elongation: Typically 6–10% in 50 mm (2 in)
   • Modulus of Elasticity: Approximately 70 GPa (10,200 ksi)
   • Electrical Conductivity: Moderate to high electrical conductivity

3. Applications:

   • Aerospace Industry: Aluminum alloy 2099 round rods are commonly used in the aerospace industry for manufacturing structural components of aircraft and spacecraft. These components include fuselage frames, wing spars, ribs, and structural reinforcements. The alloy's high strength-to-weight ratio, excellent corrosion resistance, and good weldability make it ideal for aerospace applications where lightweight yet durable materials are crucial.
   • Defense Industry: Alloy 2099 may find use in the defense industry for manufacturing military aircraft components, missiles, and other aerospace-related structures. Its high strength, corrosion resistance, and weldability contribute to the performance and reliability of defense systems.
   • Automotive Industry: While less common, aluminum alloy 2099 round rods may also be utilized in the automotive industry for lightweight structural components in high-performance vehicles. The alloy's high strength-to-weight ratio and corrosion resistance can contribute to improved fuel efficiency and performance.
   • Marine Applications: Alloy 2099 is suitable for marine applications where corrosion resistance and high strength are essential. It is used for manufacturing marine hardware, boat fittings, and structural components subjected to saltwater and harsh marine environments.
   • General Engineering: Aluminum alloy 2099 round rods are utilized in various general engineering applications requiring high strength, corrosion resistance, and good weldability. These applications include machinery components, pressure vessels, and structural elements in industrial settings.

4. Round Rods: Round rods made from aluminum alloy 2099 are available in various diameters and lengths. They are commonly used in applications where high strength, corrosion resistance, and good weldability are required.

5. Surface Finish: Aluminum alloy 2099 round rods can have various surface finishes, including mill finish (as extruded), anodized, polished, or coated finishes, depending on the specific requirements of the application.

Aluminum alloy 2099 round rods offer excellent mechanical properties, corrosion resistance, and weldability, making them suitable for a wide range of demanding applications across industries where strength, durability, and reliability are essential.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Aluminum alloy 3103 is another aluminum-manganese alloy similar to 3003 but with slightly different properties. While 3003 is more common and versatile, 3103 is specifically designed for applications requiring higher strength and better formability. When shaped into a round rod, aluminum alloy 3103 maintains these properties while offering specific advantages for certain applications.

Here's some information about aluminum alloy 3103 round rods:

1. Composition: Aluminum alloy 3103 primarily consists of aluminum (Al) with manganese (Mn) as the primary alloying element. It typically contains around 98% aluminum, approximately 1% manganese, and traces of other elements.

2. Properties:

   • Higher Strength: Compared to 3003, aluminum alloy 3103 typically offers higher strength, making it suitable for applications where increased mechanical properties are required.
   • Improved Formability: 3103 exhibits good formability, allowing it to be shaped into various forms without cracking or fracturing. This property makes it suitable for complex forming processes.
   • Weldability: Similar to 3003, aluminum alloy 3103 is weldable using conventional methods, enabling the fabrication of welded structures and components.

3. Applications:

   • Automotive Components: Aluminum alloy 3103 is commonly used in the automotive industry for manufacturing parts and components where a balance of strength and formability is required. This includes parts such as heat exchangers, radiator cores, and automotive trim.
   • Heat Exchangers: Due to its good thermal conductivity and formability, 3103 is utilized in the production of heat exchangers for various applications, including HVAC systems, refrigeration units, and industrial machinery.
   • Piping and Tubing: The alloy's combination of strength and formability makes it suitable for manufacturing piping, tubing, and other structural components in industries such as construction, plumbing, and HVAC.

4. Availability: Aluminum alloy 3103 round rods are available from metal suppliers and distributors in various sizes and lengths to suit different applications.

5. Standards and Specifications: Depending on the intended application, aluminum alloy 3103 round rods may need to meet specific industry standards or specifications, such as those set by ASTM International or other regulatory bodies.

Aluminum alloy 3103 round rods offer specific advantages for applications requiring higher strength and improved formability compared to 3003.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Aluminum alloy A360 is a cast aluminum alloy known for its excellent castability and mechanical properties. However, it's not typically used in the form of round rods. A360 is more commonly used in die casting applications, where it can be cast into intricate shapes and structures with high precision and surface finish.

Here's some information about aluminum alloy A360:

1. Composition: Aluminum alloy A360 primarily consists of aluminum with additions of silicon (Si) and copper (Cu). It may also contain small amounts of other elements to achieve specific properties.

2. Properties:

   • Castability: A360 is renowned for its excellent castability, making it easy to fill complex molds and achieve intricate details.
   • Mechanical Properties: It offers good strength and ductility, making it suitable for a wide range of applications.
   • Surface Finish: A360 castings typically have a smooth surface finish, which is desirable for many applications, particularly those requiring aesthetic appeal.

3. Applications:

   • Automotive: A360 is used in automotive applications for various components, including housings for engine parts, transmission components, and structural brackets.
   • Consumer Goods: It finds applications in consumer products such as electronics housings, decorative items, and household appliances.
   • Industrial Equipment: A360 is utilized in the manufacture of industrial equipment and machinery components due to its good mechanical properties and castability.
   • Lighting Fixtures: The alloy is commonly used in the production of lighting fixtures and components due to its ability to achieve intricate designs and excellent surface finish.

4. Availability: Aluminum alloy A360 is available from metal suppliers and foundries specializing in aluminum die casting.

Regarding round rods specifically, aluminum alloy A360 is not typically used in this form. Instead, it's cast into shapes such as housings, brackets, and components using die casting processes. However, if you have a specific application in mind for round rods made from aluminum alloy A360, custom fabrication may be possible through machining processes.

Aluminum alloy A360 is primarily used in die casting applications rather than being formed into round rods. However, if we consider the broader applications of aluminum alloys with similar properties, we can infer potential uses for A360. Here are some general applications where aluminum alloy A360 or similar alloys might be utilized:

1. Automotive Components: A360 can be used to produce various automotive components through die casting, such as engine housings, transmission cases, brackets, and structural components. Its combination of strength, castability, and corrosion resistance makes it suitable for these applications.

2. Consumer Electronics: Aluminum alloy A360 is employed in the manufacture of housings, enclosures, and structural components for consumer electronic devices such as smartphones, laptops, tablets, and cameras. Its ability to achieve intricate designs and provide good surface finish is advantageous in this sector.

3. Lighting Fixtures: A360 is commonly used in the production of lighting fixtures and components due to its excellent castability and ability to achieve detailed designs. It is used for making lamp housings, brackets, and other structural parts in various indoor and outdoor lighting applications.

4. Industrial Machinery: The alloy is utilized in industrial machinery and equipment for components such as housings, covers, and brackets. Its mechanical properties and castability make it suitable for various industrial applications where lightweight, corrosion-resistant components are required.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 4015 is not a standard alloy and may not be widely recognized. It's possible that you're referring to a less common or proprietary alloy, or there might be a typo in the designation. However, I can provide general information about aluminum alloys and round rods that might be helpful.

Aluminum alloys are designated using a four-digit numbering system established by the Aluminum Association. The first digit indicates the major alloying element or group, while the subsequent digits provide specific information about the alloy composition and properties.

For example:

• 1xxx series: Pure aluminum
• 2xxx series: Aluminum-copper alloys
• 3xxx series: Aluminum-manganese alloys
• 4xxx series: Aluminum-silicon alloys
• 5xxx series: Aluminum-magnesium alloys
• 6xxx series: Aluminum-magnesium-silicon alloys
• 7xxx series: Aluminum-zinc-magnesium alloys
• 8xxx series: Other alloys

Given that "4015" doesn't align with the standard aluminum alloy numbering system, it's possible that it's a proprietary alloy designation specific to a particular manufacturer or application. If you have more specific information or context about the alloy, I'd be happy to provide further assistance or discuss potential applications. Alternatively

Aluminum round rods are solid cylindrical bars made from aluminum alloy. They typically have a smooth surface and a uniform circular cross-section. These rods come in various diameters and lengths to suit different applications and can be readily machined, welded, and formed as needed.

Here's a typical description of an aluminum round rod:

• Material: Aluminum alloy (specific alloy designation, such as 6061 or 7075, would be provided)
• Shape: Round
• Diameter: [Specify diameter in inches or millimeters]
• Length: [Specify length in inches or millimeters]
• Surface Finish: Smooth, with minimal surface imperfections
• Features: Lightweight, corrosion-resistant, good thermal and electrical conductivity
• Applications: Versatile material suitable for various applications in construction, automotive, aerospace, manufacturing, and more.

Aluminum round rods are commonly used in structural components, support bars, shafts, axles, fasteners, handles, and electrical conductors, among other applications.

Given that "4015" doesn't correspond to a recognized aluminum alloy designation, I can't provide specific information about its applications. However, I can offer general applications for aluminum round rods, which are commonly used in various industries. Here are some typical applications:

1. Construction: Aluminum round rods are used in construction for structural components such as support beams, columns, and handrails due to their lightweight nature and corrosion resistance.

2. Automotive: They find applications in automotive components such as shafts, axles, and support bars due to their strength-to-weight ratio and resistance to corrosion.

3. Manufacturing: Aluminum round rods are utilized in manufacturing for machining components, tooling, and fixtures due to their ease of machining and good thermal conductivity.

4. Aerospace: In the aerospace industry, aluminum round rods are used in aircraft structures, landing gear, and interior components due to their high strength-to-weight ratio and resistance to fatigue.

5. Electrical: They are used in electrical applications for making conductive rods, busbars, and connectors due to aluminum's excellent electrical conductivity.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Aluminum alloy 5086 round rods are solid cylindrical bars made from aluminum alloy 5086, which is a high-strength alloy primarily composed of aluminum with additions of magnesium, manganese, chromium, and other elements. Here's some information about aluminum alloy 5086 and its potential as round rods:

1. Composition: Aluminum alloy 5086 consists primarily of aluminum (Al), with significant additions of magnesium (Mg) and smaller amounts of manganese (Mn), chromium (Cr), and other trace elements. The typical composition includes approximately 95.4% aluminum, 4.0% magnesium, 0.15% manganese, 0.35% chromium, and trace amounts of other elements.

2. Properties:

   • High Strength: 5086 aluminum alloy offers excellent strength properties, particularly in marine environments. It exhibits high tensile strength and is resistant to deformation under high-stress conditions.
   • Corrosion Resistance: Aluminum alloy 5086 provides good corrosion resistance, especially in marine atmospheres, making it suitable for applications where exposure to saltwater or harsh environments is common.
   • Weldability: 5086 round rods have good weldability, allowing for the fabrication of welded assemblies and structures using common welding techniques. This feature enhances their versatility and ease of fabrication.
   • Formability: While not as easily formed as some other aluminum alloys, 5086 round rods can be formed using standard methods with appropriate equipment and processes.
   • Machinability: Aluminum alloy 5086 round rods can be machined using standard methods with appropriate tooling and cutting parameters, although they may be more challenging to machine compared to some other aluminum alloys.
   • Lightweight: Like all aluminum alloys, 5086 round rods are lightweight, offering advantages in applications where weight reduction is desirable.

3. Applications:

   • Marine Components: Due to its excellent strength and corrosion resistance, aluminum alloy 5086 round rods are widely used in the marine industry for boat hulls, decks, and other structural components.
   • Aerospace: 5086 round rods may find applications in the aerospace industry for manufacturing structural components and parts for aircraft and aerospace vehicles.
   • Automotive Parts: They could be used in the automotive sector for manufacturing components such as chassis parts, structural reinforcements, and body panels.
   • Industrial Equipment: Aluminum alloy 5086 round rods may find use in various industrial equipment and machinery for fabricating components such as conveyor systems, machine frames, and structural supports.
   • General Fabrication: They find application in general fabrication projects requiring high strength and corrosion resistance, such as pressure vessels, storage tanks, and machine parts.

Overall, aluminum alloy 5086 round rods offer a combination of high strength, corrosion resistance, weldability, and lightweight properties, making them suitable for various applications across industries such as marine, aerospace, automotive, industrial equipment, and general fabrication.

Additional Information:

Approx. Rs 1,200 / KgGet Latest Price

Aluminum alloy 7068 round rods are solid cylindrical bars made from aluminum alloy 7068, which is a high-strength aluminum alloy primarily composed of aluminum, zinc, magnesium, copper, and small amounts of other elements. Here's some information about aluminum alloy 7068 and its potential use in round rod form:

1. Composition: Aluminum alloy 7068 typically contains approximately 89.1% aluminum, 2.1% zinc, 2.0% magnesium, 1.9% copper, and trace amounts of other elements such as chromium and manganese. This composition gives it exceptional strength and toughness properties.

2. Properties:

   • High Strength: Aluminum alloy 7068 is known for its outstanding strength, making it one of the highest strength aluminum alloys available. It offers excellent strength-to-weight ratio, allowing for the construction of lightweight yet durable components and structures.
   • Toughness: In addition to its high strength, 7068 round rods exhibit excellent toughness, making them resistant to fracture and deformation under impact and shock loading conditions. This toughness is essential for applications where reliability and durability are critical.
   • Corrosion Resistance: Aluminum alloy 7068 offers good corrosion resistance, particularly in certain environments. Proper surface treatments or coatings can further enhance its corrosion resistance for specific applications.
   • Weldability: While aluminum alloy 7068 is not as easily weldable as some softer aluminum alloys, it can still be welded using appropriate techniques. However, welding may affect its mechanical properties, so care must be taken during the welding process.
   • Machinability: Aluminum alloy 7068 round rods exhibit fair to good machinability, allowing for the fabrication of precise components and parts with proper machining techniques and tools.
   • Heat Treatability: 7068 round rods are heat-treatable, meaning their mechanical properties can be significantly enhanced through heat treatment processes such as solution heat treatment and precipitation hardening. This allows for the optimization of the material's strength, hardness, and other properties.
   • Fatigue Resistance: Aluminum alloy 7068 demonstrates excellent fatigue resistance, making it suitable for applications subjected to cyclic loading or repeated stress. This fatigue resistance ensures long-term durability and reliability in high-stress environments, such as aerospace structures and military applications.

3. Applications:

   • Aerospace Industry: Aluminum alloy 7068 round rods are commonly used in the aerospace industry for manufacturing structural components of aircraft, including fuselage frames, wing spars, and landing gear components. The alloy's high strength-to-weight ratio makes it ideal for reducing weight and improving fuel efficiency in aircraft.
   • Military and Defense: They are employed in military and defense-related applications, including armored vehicles, missile components, and aircraft structures, where high strength, toughness, and lightweight properties are critical for mission success.
   • High-Performance Sports Equipment: They may be utilized in the production of high-performance sports equipment such as bicycle frames, where strength, toughness, and lightweight properties are essential for optimal performance.

Overall, aluminum alloy 7068 round rods offer exceptional strength, toughness, corrosion resistance, weldability, machinability, heat treatability, and fatigue resistance, making them suitable for a wide range of demanding applications in industries such as aerospace, defense, sports equipment manufacturing

Additional Information:

Approx. Rs 2,000 / KgGet Latest Price

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminium alloy 8011 is a versatile alloy primarily composed of aluminium, with additional elements such as iron, silicon, and copper, which contribute to its mechanical properties and formability. Round rods made from this alloy are commonly used in various industries due to their excellent corrosion resistance, weldability, and thermal conductivity.

Here are some features and applications of aluminium alloy 8011 round rods:

Features:

1. Corrosion Resistance: Alloy 8011 exhibits excellent resistance to corrosion, making it suitable for applications where exposure to moisture or harsh environments is expected, such as in marine or outdoor applications.

2. Formability: This alloy has good formability, allowing it to be easily shaped, bent, or formed into various configurations. This feature makes it ideal for applications that require complex shapes or intricate designs.

3. Weldability: Aluminium alloy 8011 can be readily welded using various techniques, including TIG (tungsten inert gas) welding, MIG (metal inert gas) welding, and resistance welding. This facilitates the fabrication of assemblies and structures using round rods.

4. Thermal Conductivity: The high thermal conductivity of alloy 8011 makes it suitable for applications where heat dissipation is important, such as in heat exchangers, cooling fins, and other thermal management systems.

Applications:

1. Food Packaging: Aluminium alloy 8011 is commonly used in the production of food packaging materials, including foil wraps, containers, and lids. Its non-toxic properties, corrosion resistance, and ability to withstand various temperatures make it suitable for storing and transporting food products safely.

2. Household Goods: Round rods made from alloy 8011 are used in the manufacturing of various household goods, such as curtain rods, furniture components, and decorative trim. Its corrosion resistance and formability make it an attractive choice for interior and exterior applications.

3. Electrical Conductors: Due to its high electrical conductivity, aluminium alloy 8011 is used in the production of electrical conductors, cables, and wires. Its lightweight nature and corrosion resistance make it a preferred material for electrical wiring systems.

4. Heat Transfer Applications: Alloy 8011 round rods are utilized in heat transfer applications, including heat exchangers, HVAC (heating, ventilation, and air conditioning) systems, and radiator components. Its thermal conductivity properties help in efficient heat dissipation and transfer.

5. Craftsmanship and DIY Projects: Alloy 8011 round rods are popular among hobbyists and DIY enthusiasts for various crafting and construction projects. They can be easily cut, drilled, and shaped to create custom components, decorative items, and structural elements.

Overall, aluminium alloy 8011 round rods offer a combination of corrosion resistance, formability, weldability, and thermal conductivity, making them suitable for a wide range of applications across different industries.

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price

Aluminum Alloy 2017 is another high-strength material commonly used in aerospace and other industries. It shares some similarities with Alloy 2024 but also has unique properties that make it suitable for specific applications. Here’s a detailed overview of Aluminum Alloy 2017 sheet/plate:

• Aluminum (Al): Remainder
• Copper (Cu): Approximately 3.5–4.5%
• Manganese (Mn): Approximately 0.4–1.0%
• Magnesium (Mg): Approximately 0.4–1.0%
• Iron (Fe): Maximum 0.7%
• Silicon (Si): Maximum 0.8%
• Zinc (Zn): Maximum 0.25%
• Titanium (Ti): Maximum 0.15%
• Chromium (Cr): Maximum 0.1%

1. High Strength:

   • Tensile strength around 430 MPa (62,000 psi).
   • Yield strength around 290 MPa (42,000 psi).

2. Good Machinability:

   • Similar to 2024, it can be machined easily, making it suitable for precision parts.

3. Heat Treatability:

   • Can be heat treated to enhance mechanical properties. Typically supplied in T4 temper (solution heat-treated and naturally aged).

4. Moderate Corrosion Resistance:

   • Better corrosion resistance compared to 2024, but still requires protective coatings for certain environments.

5. Good Formability:

   • Easier to form in the annealed condition, allowing for complex shapes.

• Aerospace Components: Used in the manufacturing of aircraft structures and other high-stress components.
• Automotive Parts: Employed in high-performance vehicle parts where strength and weight are critical.
• Industrial Applications: Utilized in making high-strength machinery parts, tools, and structural components.
• Military: Used in military hardware due to its strength and durability.
• Fasteners: Commonly used in the production of rivets and other fastening devices.

• Heat Treatment: Available in several tempers, such as T3, T4, and T451, providing flexibility in mechanical properties.
• Workability: Good workability in the annealed state, suitable for forming and shaping.

• Sheet/Plate Thickness: Available in various thicknesses to meet different application requirements.
• Standard Sizes: Offered in standard dimensions but can also be customized to specific sizes.

• Storage: Should be stored in a dry, clean environment to prevent oxidation and corrosion.
• Handling: Handle with care to avoid surface damage, such as scratches or dents.

To ensure Aluminum Alloy 2017 sheets and plates are protected during transportation and storage, follow these packaging best practices:

1. Protection Against Physical Damage:

   • Edge Protectors: Use plastic or cardboard edge protectors.
   • Padding: Place foam or bubble wrap between sheets.

2. Moisture Protection:

   • Moisture-Resistant Wrap: Use plastic film or VCI paper.
   • Desiccants: Add desiccant packs to absorb moisture.

3. Structural Support:

   • Wooden Crates or Pallets: Use sturdy crates or pallets.
   • Metal Strapping: Secure with metal or heavy-duty plastic straps.

4. Clear Labeling:

   • Identification Tags: Include alloy type, dimensions, and handling instructions.
   • Handling Instructions: Mark with appropriate handling instructions like "Fragile" or "Keep Dry."

• Surface Finish: Can be anodized for improved corrosion resistance and aesthetic appeal.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Additional Information:

Approx. Rs 600 / KgGet Latest Price

Aluminum alloy 5052 is a non-heat treatable alloy known for its excellent corrosion resistance, high fatigue strength, and good weldability. It belongs to the 5000 series of aluminum alloys, which are widely used in various industries. Here's an overview of aluminum alloy 5052 sheet/plate:

Composition:

• Aluminum alloy 5052 primarily consists of aluminum (Al) as the base metal, with magnesium (Mg) being the primary alloying element. It may also contain trace amounts of other elements, including chromium (Cr) and manganese (Mn), to enhance specific properties.

Properties:

• Corrosion Resistance: One of the key features of aluminum alloy 5052 is its excellent corrosion resistance, particularly in marine and chemical environments. This property makes it suitable for applications where exposure to corrosive substances is common.

• Strength: The alloy offers good strength, especially when cold worked, making it suitable for structural applications requiring moderate strength and high fatigue resistance. It has higher strength than 1000 and 3000 series alloys but lower than 6000 series alloys.

• Formability: Aluminum alloy 5052 exhibits good formability, allowing it to be easily formed into various shapes through processes such as rolling, bending, and deep drawing. This property facilitates the manufacture of complex parts and components.

• Weldability: The alloy is readily weldable using common welding techniques, such as MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) welding, as well as resistance welding methods. This feature enables ease of fabrication and assembly.

• Surface Finish: Aluminum alloy 5052 can achieve a smooth surface finish, making it suitable for applications where aesthetics are important, such as architectural elements and consumer products.

Applications:

• Marine Applications: Aluminum alloy 5052 is commonly used in the marine industry for boat hulls, decks, and other components due to its excellent corrosion resistance to seawater.

• Architectural: The alloy finds applications in architectural projects for facades, roofing, and decorative elements due to its corrosion resistance and aesthetic appeal.

• Transportation: Aluminum alloy 5052 is used in the transportation industry for manufacturing truck trailers, vehicle panels, and other components where lightweight, corrosion-resistant materials are required.

• Consumer Goods: The alloy is utilized in the production of consumer goods such as kitchenware, appliances, and signage due to its formability, corrosion resistance, and ability to achieve a smooth surface finish.

• Industrial Equipment: Aluminum alloy 5052 finds applications in industrial equipment manufacturing, including chemical processing equipment, storage tanks, and HVAC systems, where corrosion resistance is critical.

Manufacturing:

• Aluminum alloy 5052 sheets and plates are typically manufactured through processes such as hot rolling, cold rolling, and annealing to achieve the desired thickness, mechanical properties, and surface finish.

Overall, aluminum alloy 5052 sheet/plate is a versatile material suitable for a wide range of applications in industries such as marine, architecture, transportation, consumer goods, and industrial manufacturing, where corrosion resistance, strength, formability, and weldability are essential requirements.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 5754 is a non-heat treatable alloy known for its excellent corrosion resistance, weldability, and formability. It belongs to the 5000 series of aluminum alloys and is commonly used in various industries. Here's an overview of aluminum alloy 5754 sheet/plate:

Composition:

• Aluminum alloy 5754 primarily consists of aluminum (Al) as the base metal, with magnesium (Mg) being the primary alloying element. It may also contain trace amounts of other elements such as manganese (Mn) and chromium (Cr) to enhance specific properties.

Properties:

• Corrosion Resistance: One of the key features of alloy 5754 is its excellent corrosion resistance, particularly in marine and industrial environments. It offers good resistance to both freshwater and seawater corrosion, making it suitable for marine applications.

• Weldability: Aluminum alloy 5754 is highly weldable using various welding techniques such as MIG (Metal Inert Gas) welding, TIG (Tungsten Inert Gas) welding, and resistance welding. This feature allows for ease of fabrication and assembly of components.

• Formability: The alloy exhibits good formability, allowing it to be easily formed and shaped through processes such as rolling, bending, and deep drawing. This property facilitates the manufacture of complex parts and components.

• Strength: While not as high as some other aluminum alloys, alloy 5754 offers sufficient strength for many applications, particularly in its H22 and H24 tempers. It provides good strength-to-weight ratio, contributing to lightweight designs.

• Machinability: Alloy 5754 has good machinability, allowing for efficient machining operations such as milling, drilling, turning, and tapping. Its machinability facilitates the production of precision components with tight tolerances.

Applications:

• Marine Industry: Aluminum alloy 5754 is commonly used in the marine sector for building boat hulls, decks, and superstructures. Its excellent corrosion resistance and formability make it ideal for marine applications where exposure to seawater is common.

• Automotive Components: The alloy finds applications in the automotive industry for manufacturing vehicle panels, body panels, and structural components. Its combination of corrosion resistance, formability, and weldability makes it suitable for automotive applications.

• Transportation: Alloy 5754 is utilized in various transportation applications, including truck bodies, trailers, and railway carriages. Its lightweight nature and corrosion resistance contribute to fuel efficiency and durability in transportation systems.

• Construction: The alloy is employed in the construction industry for architectural elements, roofing, and cladding. Its corrosion resistance and formability make it suitable for exterior applications exposed to harsh environmental conditions.

• Industrial Equipment: Aluminum alloy 5754 finds applications in industrial equipment manufacturing, including storage tanks, pressure vessels, and machinery components. Its corrosion resistance and weldability make it suitable for various industrial applications.

Manufacturing:

• Aluminum alloy 5754 sheets and plates are typically manufactured through processes such as hot rolling, cold rolling, and annealing to achieve the desired thickness, mechanical properties, and surface finish.

Overall, aluminum alloy 5754 sheet/plate is valued for its excellent corrosion resistance, weldability, formability, and machinability, making it a versatile material for various applications in industries such as marine, automotive, transportation, construction, and industrial manufacturing.

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price

Aluminum alloy 8091 is a specialized material primarily used in aerospace applications due to its high strength, lightweight properties, and corrosion resistance. Here's a typical approach to packaging sheets and plates made of this alloy:

1. Individual Wrapping: Each sheet or plate is meticulously wrapped individually with a protective layer, such as plastic film or paper. This wrapping serves to safeguard the surface from scratches, abrasions, and other damage during handling and transportation.

2. Interleaving: If multiple sheets or plates are stacked together, interleaving materials like foam sheets or paper are placed between them. This layer of interleaving provides cushioning and prevents direct contact between adjacent pieces, reducing the risk of surface damage.

3. Stacking and Bundling: Stacked sheets or plates are carefully arranged to minimize shifting during transportation. They may be bundled together using straps, shrink-wrap, or bands to secure the stack and maintain alignment.

4. Palletization: The bundled sheets or plates are then positioned on sturdy wooden pallets or skids. Pallets are selected based on the size and weight of the materials, ensuring stability and ease of handling during transportation.

5. Securing and Reinforcement: Palletized loads are securely fastened using straps, bands, or stretch-wrap to prevent shifting or toppling. Corner protectors or edge guards may also be added to reinforce the load and minimize the risk of damage.

6. Labeling and Identification: Each package is clearly labeled with important information, including alloy type (8091), dimensions, quantity, and handling instructions. This labeling facilitates easy identification and inventory management.

7. Documentation: Accompanying the shipment are necessary documents such as packing lists and certificates of compliance, confirming that the materials meet specified requirements and providing essential information for quality assurance and regulatory compliance.

8. Environmental Protection: If the materials are susceptible to moisture or environmental conditions during transit or storage, additional protective measures may be applied. This could include moisture-resistant packaging or the inclusion of desiccants to absorb humidity.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 7075 round rods are solid cylindrical bars made from aluminum alloy 7075, which is one of the highest strength aluminum alloys available. Here's some information about aluminum alloy 7075 and its potential use in round rod form:

1. Composition: Aluminum alloy 7075 is primarily composed of aluminum (Al) with additional alloying elements such as zinc (Zn), magnesium (Mg), and copper (Cu). The typical composition includes approximately 90% aluminum, 5.6% zinc, 2.5% magnesium, 1.6% copper, and trace amounts of other elements.

2. Properties:

   • High Strength: One of the most significant features of aluminum alloy 7075 round rods is their exceptional strength-to-weight ratio. They offer high strength comparable to many steels while remaining lightweight, making them ideal for applications where strength and weight savings are critical.
   • Corrosion Resistance: Aluminum alloy 7075 round rods exhibit good resistance to corrosion, although they are not as corrosion-resistant as some other aluminum alloys like 6061 or 6063. Proper surface treatments or coatings can enhance their corrosion resistance for specific applications.
   • Machinability: While aluminum alloy 7075 is not as easily machinable as some softer aluminum alloys, it can still be machined using appropriate techniques and tools. Its machinability can be improved by using proper cutting fluids and machining parameters.
   • Weldability: Aluminum alloy 7075 round rods are generally considered not readily weldable due to their high strength and susceptibility to cracking during welding. However, certain welding processes, such as friction stir welding or laser welding, may be used with careful control to achieve satisfactory results.
   • Heat Treatability: 7075 round rods are heat-treatable, meaning their mechanical properties can be significantly enhanced through heat treatment processes such as solution heat treatment and precipitation hardening. This allows for tailoring the material's properties to meet specific requirements.
   • Fatigue Resistance: Aluminum alloy 7075 exhibits excellent fatigue resistance, making it suitable for applications subjected to cyclic loading or repeated stress, such as aerospace components and high-performance bicycle frames.

3. Applications:

   • Aerospace Industry: Aluminum alloy 7075 round rods are extensively used in the aerospace industry for manufacturing structural components, aircraft fuselage frames, wing spars, and other critical parts requiring high strength and low weight.
   • High-Performance Sports Equipment: They find applications in the production of high-performance sports equipment such as bicycle frames, where the combination of high strength and low weight is essential for performance.
   • Defense and Military: Aluminum alloy 7075 is used in military applications for manufacturing firearm components, missile parts, and armored vehicles due to its exceptional strength and durability.
   • Automotive Racing: In automotive racing and motorsports, 7075 round rods are employed for manufacturing suspension components, chassis parts, and other structural elements where lightweight and high strength are paramount.

Overall, aluminum alloy 7075 round rods offer outstanding strength-to-weight ratio, making them suitable for demanding applications where high strength, low weight, and excellent fatigue resistance are required. However, their use may be limited by their relatively lower corrosion resistance and challenging machinability compared to other aluminum alloys.

Additional Information:

Approx. Rs 3,500 / KgGet Latest Price

Aluminum alloys are metallic materials composed primarily of aluminum, along with other alloying elements such as copper, magnesium, zinc, and silicon, among others. These alloys are known for their lightweight nature, corrosion resistance, and versatility, making them widely used in various industries including aerospace, automotive, construction, and manufacturing.

Key characteristics of aluminum alloys include:

1. Lightweight: Aluminum alloys have a low density, making them lightweight and ideal for applications where weight savings are crucial, such as in the aerospace and automotive industries.

2. Strength: Depending on the alloy composition and heat treatment, aluminum alloys can exhibit high strength and excellent structural properties.

3. Corrosion Resistance: Aluminum naturally forms a protective oxide layer on its surface, providing good resistance to corrosion in many environments.

4. Machinability: Aluminum alloys are generally easy to machine, allowing for efficient manufacturing processes.

5. Thermal and Electrical Conductivity: Aluminum alloys have good thermal and electrical conductivity, making them suitable for heat transforM

6. Aluminum alloy 2070 is a cutting-edge material engineered to meet the demanding requirements of aerospace applications. While specific details may vary based on manufacturer specifications and industry standards, here's a general description:

7. Composition:

   • Aluminum alloy 2070 typically contains a precise blend of aluminum along with various alloying elements such as copper, magnesium, and zinc. These elements are carefully chosen to enhance specific properties like strength, corrosion resistance, and machinability.

   Properties:

   • High Strength: Aluminum alloy 2070 exhibits excellent strength-to-weight ratio, making it suitable for structural components in aerospace and other high-performance applications.
   • Corrosion Resistance: The alloy is designed to resist corrosion, ensuring durability and longevity even in harsh environments.
   • Lightweight: Like all aluminum alloys, 2070 is lightweight, contributing to fuel efficiency and overall performance in aerospace systems.
   • Machinability: While being strong and durable, aluminum alloy 2070 is also machinable, allowing for ease of fabrication into various shapes and components.

   Applications:

   • Aerospace Components: Aluminum alloy 2070 is commonly used in the aerospace industry for structural components in aircraft, spacecraft, and satellites where high strength and lightweight properties are crucial.
   • Automotive Industry: It may also find applications in the automotive industry, particularly in the manufacturing of lightweight vehicles to improve fuel efficiency.
   • Industrial Machinery: Components requiring high strength and corrosion resistance in industrial machinery may benefit from this alloy's properties.

   Manufacturing:

   • Aluminum alloy 2070 is typically produced through a combination of casting, rolling, and heat treatment processes to achieve the desired mechanical properties and dimensional accuracy.
   • Sheets and plates of aluminum alloy 2070 are manufactured to precise thicknesses and dimensions to meet the requirements of various engineering applications.

   Overall, aluminum alloy 2070 represents a state-of-the-art material solution for industries where lightweight, high-strength, and corrosion-resistant properties are paramount. Its use continues to expand as advancements in material science and manufacturing techniques evolve.

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price

Aluminum alloy 8093 is a specialized material known for its high strength, lightweight properties, and corrosion resistance. Here's how sheets and plates made of this alloy are typically packaged:

1. Protective Wrapping: Each sheet or plate is individually wrapped with a protective layer, such as plastic film or paper. This wrapping shields the surface from scratches, abrasions, and other damage during handling and transit.

2. Interleaving: If multiple sheets or plates are stacked together, interleaving materials like foam sheets or paper may be inserted between them. This additional layer provides cushioning and prevents direct contact between adjacent pieces, reducing the risk of scratching or marring.

3. Stacking and Bundling: Stacked sheets or plates are carefully arranged to minimize shifting during transportation. They may be bundled together using straps, shrink-wrap, or bands to secure the stack and maintain alignment.

4. Palletization: The bundled sheets or plates are then placed on sturdy wooden pallets or skids. Pallets are selected based on the size and weight of the materials, ensuring stability and ease of handling during transportation.

5. Securing and Reinforcement: Palletized loads are secured using straps, bands, or stretch-wrap to prevent shifting or toppling. Corner protectors or edge guards may be added to reinforce the load and minimize the risk of damage.

6. Labeling and Identification: Each package is labeled with essential information, including alloy type (8093), dimensions, quantity, and handling instructions. Clear labeling facilitates easy identification and inventory management.

7. Documentation: Accompanying the shipment are documents such as packing lists and certificates of compliance, confirming that the materials meet specified requirements and providing essential information for quality assurance and regulatory compliance.

8. Environmental Protection: If the materials are susceptible to moisture or environmental conditions during transit or storage, additional protective measures may be applied. This could include moisture-resistant packaging or the inclusion of desiccants to absorb humidity.

By following these packaging practices, manufacturers and suppliers ensure that aluminum alloy 8093 sheets and plates are adequately protected and preserved, maintaining their quality until they reach their destination.

Additional Information:

Approx. Rs 1,000 / KgGet Latest Price

Copper sheet/plate is a versatile material used in various industries for its excellent conductivity, corrosion resistance, and malleability. Let's explore its features, applications, and packaging considerations:

1. High Conductivity: Copper is one of the most conductive metals, making copper sheet/plate ideal for electrical applications where high conductivity is essential.

2. Corrosion Resistance: Copper exhibits excellent resistance to corrosion, making it suitable for outdoor and marine applications.

3. Malleability: Copper is highly malleable and ductile, allowing it to be easily formed into complex shapes without losing its strength.

4. Thermal Conductivity: Copper has excellent thermal conductivity, making it suitable for heat transfer applications such as heat exchangers and cooling systems.

5. Aesthetic Appeal: Copper has a distinctive reddish-brown color that adds aesthetic value to architectural and decorative applications.

1. Electrical Wiring: Copper sheet/plate is widely used in electrical wiring and distribution systems due to its high conductivity and reliability.

2. Electronics: It is used in the manufacture of printed circuit boards (PCBs), connectors, and other electronic components where conductivity and reliability are critical.

3. Roofing and Cladding: Copper sheet/plate is commonly used in roofing and cladding applications due to its corrosion resistance and aesthetic appeal.

4. Heat Exchangers: Copper is used in the construction of heat exchangers and radiators due to its excellent thermal conductivity and corrosion resistance.

5. Craftsmanship and Art: Copper sheet/plate is popular among craftsmen and artists for its malleability and aesthetic qualities, used in sculptures, jewelry, and decorative objects.

6. Marine Applications: Copper's corrosion resistance makes it suitable for marine applications such as boat hulls, propellers, and marine fittings.

1. Surface Protection: Copper sheet/plate should be coated with a protective film or oil to prevent oxidation and corrosion during storage and transportation.

2. Bundling and Stacking: Sheets/plates should be bundled securely using straps or bands to prevent movement during transit. When stacking, ensure that bundles are stacked evenly and securely to prevent shifting.

3. Crating: For large orders or heavy sheets/plates, wooden crates should be used to provide additional protection against impacts and rough handling.

4. Labeling and Documentation: Each package or bundle should be clearly labeled with information such as alloy type, dimensions, quantity, and handling instructions. Include packing lists, certificates of compliance, and other relevant shipping documents with the packages.

5. Moisture Protection: Include desiccant packets or moisture-absorbing materials in the packaging to prevent moisture-related corrosion during transit and storage.

Proper packaging of copper sheet/plate ensures its protection and integrity during transportation and storage, maintaining its quality for various applications. By following these packaging guidelines and using suitable materials and techniques, the risk of damage, corrosion, and contamination can be minimized, ensuring that the sheet/plate arrives at its destination in optimal condition.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

Aluminum pipes possess several features that make them highly desirable for a wide range of applications across various industries. Here are some key features of aluminum pipes:

1. Lightweight: Aluminum is a lightweight metal, making aluminum pipes significantly lighter than pipes made from other materials such as steel. This feature is advantageous in applications where weight reduction is critical, such as automotive, aerospace, and marine industries, as it helps improve fuel efficiency and overall performance.

2. Corrosion Resistance: Aluminum naturally forms a protective oxide layer on its surface, providing excellent resistance to corrosion from moisture, chemicals, and environmental exposure. This inherent corrosion resistance makes aluminum pipes suitable for use in outdoor, marine, and corrosive environments without the need for additional coatings or treatments.

3. High Strength-to-Weight Ratio: Despite being lightweight, aluminum pipes offer high strength, allowing them to withstand substantial loads and pressures. This high strength-to-weight ratio makes aluminum pipes suitable for structural applications where strength and durability are essential, such as in construction, aerospace, and automotive industries.

4. Ductility: Aluminum is highly ductile, meaning it can be easily formed, bent, and fabricated into various shapes and configurations without losing its structural integrity. This ductility allows for flexibility in design and manufacturing, making aluminum pipes suitable for custom and complex applications.

5. Thermal Conductivity: Aluminum has excellent thermal conductivity, allowing it to efficiently transfer heat. Aluminum pipes are commonly used in applications where heat transfer or thermal dissipation is required, such as in HVAC systems, heat exchangers, and thermal management applications.

6. Electrical Conductivity: Aluminum is a good conductor of electricity, making aluminum pipes suitable for electrical applications such as electrical conduits and busbars. They provide an efficient and cost-effective solution for transmitting electrical power and signals in various electrical systems and installations.

7. Versatility: Aluminum pipes are versatile and can be used in a wide range of applications across various industries due to their favorable properties and ease of fabrication. They are available in different sizes, shapes, and alloy compositions to suit specific application requirements.

8. Recyclability: Aluminum is a highly recyclable material, and aluminum pipes can be recycled repeatedly without losing their properties or quality. This recyclability makes aluminum pipes an environmentally friendly choice and contributes to sustainability efforts in industries that prioritize eco-friendly materials and practices.

Overall, the combination of lightweight construction, corrosion resistance, high strength-to-weight ratio, ductility, thermal conductivity, electrical conductivity, versatility, and recyclability makes aluminum pipes highly desirable for a multitude of applications in modern industry.

Additional Information:

Approx. Rs 400 / KgGet Latest Price

1. Composition: Aluminum alloy 3003 primarily consists of aluminum (Al) with small amounts of other elements. It typically contains around 98% aluminum, 1-1.5% manganese (Mn), and traces of other elements like copper (Cu) and iron (Fe).

2. Properties:

   • Corrosion Resistance: Aluminum alloy 3003 has excellent resistance to corrosion, particularly in environments where there are high levels of moisture.
   • Formability: It is highly formable, which means it can be easily shaped into various forms without cracking or breaking.
   • Weldability: This alloy is well-suited for welding using conventional methods, allowing for the fabrication of complex structures.
   • Strength: It has moderate strength, making it suitable for applications where strength requirements are not extremely high.
   • Workability: Aluminum alloy 3003 is easy to work with using common metalworking techniques such as cutting, drilling, bending, and forming.

3. Applications:

   • Cookware: Due to its corrosion resistance and formability, it's commonly used in the manufacture of cookware such as pots, pans, and trays.
   • Construction: Used in architectural trim, roofing, siding, and other construction applications where its corrosion resistance and lightweight properties are beneficial.
   • Automotive: Some automotive components, such as heat exchangers and radiator cores, utilize aluminum alloy 3003 due to its heat dissipation properties and formability.
   • General Fabrication: Widely used in various fabrication projects where a combination of corrosion resistance, formability, and moderate strength is required.

4. Availability: Aluminum alloy 3003 round rods are readily available in various sizes and lengths from metal suppliers and distributors.

5. Standards and Specifications: Depending on the intended application, aluminum alloy 3003 may need to meet specific industry standards or specifications, such as those set by ASTM International or other regulatory bodies.

6. Aluminum alloy 3003 round rods find numerous applications across different industries due to their beneficial properties. Here are some common applications: 1. **Manufacturing and Fabrication**: Aluminum alloy 3003 round rods are used in various manufacturing processes, including machining, turning, milling, and drilling. They are often employed in fabricating components for machinery, equipment, and structural frameworks. 2. **Architectural Uses**: In architecture, aluminum alloy 3003 round rods are utilized for architectural trim, decorative elements, and structural supports. Their corrosion resistance and formability make them suitable for outdoor applications such as handrails, fencing, and signage. 3. **Electrical and Electronics**: Due to its excellent conductivity and corrosion resistance, aluminum alloy 3003 is used in the production of electrical components, including busbars, terminals, and conductive rods. 4. **Transportation**: Aluminum alloy 3003 round rods are employed in various transportation applications, including automotive, marine, and aerospace industries. They are used for fabricating components such as fuel tanks, heat exchangers, structural supports, and lightweight assemblies.

Additional Information:

Approx. Rs 500 / KgGet Latest Price

Aluminum alloy 3003 is a widely used alloy known for its excellent corrosion resistance, moderate strength, and good formability. It's commonly used in various applications requiring moderate strength and corrosion resistance, such as packaging, automotive parts, cooking utensils, and architectural components. Here's an overview of aluminum alloy 3003 sheet/plate:

Composition:

• Aluminum alloy 3003 primarily consists of aluminum as the base metal, with manganese as the primary alloying element. It may also contain small amounts of other elements for enhanced properties.

Properties:

• Corrosion Resistance: One of the standout features of aluminum alloy 3003 is its excellent corrosion resistance, particularly in environments where exposure to moisture and humidity is common. This property makes it suitable for outdoor and marine applications.
• Moderate Strength: While not as strong as some other aluminum alloys, 3003 offers sufficient strength for many applications. Its moderate strength-to-weight ratio makes it suitable for structural components where weight savings are desired but high strength is not a primary requirement.
• Formability: Aluminum alloy 3003 exhibits excellent formability, allowing it to be easily formed into various shapes through processes such as bending, stamping, and deep drawing. This makes it ideal for applications requiring intricate or complex geometries.
• Weldability: The alloy is highly weldable using common techniques such as MIG and TIG welding, allowing for ease of fabrication and assembly.
• Heat Treatment: Aluminum alloy 3003 is not heat treatable, meaning its mechanical properties are primarily determined by its composition and manufacturing process.

Applications:

• Cookware and Kitchen Utensils: Aluminum alloy 3003 is commonly used in the manufacture of cookware, kitchen utensils, and food packaging due to its corrosion resistance and formability.
• Architectural Components: The alloy is utilized in architectural applications such as roofing, siding, and decorative trim due to its corrosion resistance and ability to be formed into various shapes.
• Automotive Parts: Aluminum alloy 3003 is used in automotive applications such as heat exchangers, radiator cores, and trim components due to its corrosion resistance and lightweight properties.
• Packaging: The alloy is widely used in the packaging industry for making beverage cans, food containers, and foil wraps due to its corrosion resistance and formability.

Manufacturing:

• Aluminum alloy 3003 sheets and plates are typically manufactured through processes such as hot rolling, cold rolling, and annealing to achieve the desired thickness, mechanical properties, and surface finish.

Overall, aluminum alloy 3003 sheet/plate is a versatile material suitable for a wide range of applications requiring moderate strength, excellent corrosion resistance, and good formability. Its affordability and availability make it a popular choice in various industries.

Additional Information:

Approx. Rs 600 / KgGet Latest Price

Aluminum alloy 5086 is a marine-grade alloy known for its excellent corrosion resistance and high strength. Here's an overview of its features, applications, and packaging:

Features:

1. Corrosion Resistance: Alloy 5086 offers outstanding resistance to corrosion, particularly in marine environments. It is highly resistant to seawater and saltwater corrosion, making it suitable for marine applications such as boat hulls and structures.

2. High Strength: Despite being a non-heat treatable alloy, 5086 offers good strength properties, especially in its H32 and H34 tempers. This high strength-to-weight ratio makes it suitable for structural components subjected to high loads and stress.

3. Weldability: Alloy 5086 is readily weldable using various welding techniques, including arc welding, MIG welding, and TIG welding. Its weldability allows for ease of fabrication and assembly of components.

4. Formability: The alloy exhibits good formability, allowing it to be easily formed and shaped through processes such as rolling, bending, and deep drawing. This formability makes it suitable for a wide range of applications requiring complex shapes and designs.

5. Machinability: While not as machinable as some other aluminum alloys, 5086 can be machined using conventional methods. Its machinability allows for the production of precision components with tight tolerances.

6. Low Temperature Performance: Alloy 5086 maintains its mechanical properties at low temperatures, making it suitable for cryogenic applications where materials must withstand extremely cold conditions.

Applications:

1. Marine Industry: Alloy 5086 is extensively used in the marine sector for building boat hulls, decks, and other marine structures. Its corrosion resistance and high strength make it ideal for applications exposed to seawater and harsh marine environments.

2. Transportation: The alloy finds applications in transportation industries for manufacturing truck trailers, railway cars, and other transportation components. Its lightweight nature and corrosion resistance contribute to fuel efficiency and durability.

3. Offshore Structures: Alloy 5086 is used in the construction of offshore platforms, oil rigs, and other offshore structures. Its corrosion resistance makes it suitable for use in saltwater environments and offshore applications.

4. Pressure Vessels: The alloy is utilized in the manufacturing of pressure vessels and tanks for storing liquids and gases. Its high strength and corrosion resistance ensure the integrity of the vessel under high pressure and corrosive conditions.

5. General Engineering: Alloy 5086 finds applications in various general engineering projects, including structural components, architectural elements, and machinery parts. Its combination of strength, corrosion resistance, and formability makes it suitable for diverse engineering applications.

Packaging: Packaging for aluminum alloy 5086 sheet/plate typically involves protective wrapping, interleaving, stacking, securing, palletization, labeling, and protection against environmental factors. This ensures the material's protection during transportation and storage, maintaining its quality and integrity until it reaches its destination.

In summary, aluminum alloy 5086 sheet/plate is valued for its exceptional corrosion resistance, high strength, weldability, formability, and suitability for marine and structural applications.

Additional Information: